Key takeaways
- Rule of thumb: make the code at least one tenth of the scanning distance. 3 metres away needs about 30 cm.
- A short link behind the code keeps the pattern simple, so it scans from further away.
- Download SVG for large prints. It stays sharp at any size.
- Print a test at real size and scan it from the real distance before printing the whole run.
On this page4
The banner looks great on the laptop. Then it goes up above the shop, people point their phones at it from the pavement, and nothing happens. The code is simply too small for the distance.
There is a simple rule that gets the size right, plus a few habits that make the difference between a code people scan and one they ignore.
Kopi Senja
Grand opening
Scan for the opening promo
30 cm
3 m
scanned from here
The distance rule
A widely used rule of thumb: the width of the code should be at least one tenth of the distance it is scanned from. It is the same rule as in our guides for café menus and product packaging, just at a bigger scale.
| Where | Scanning distance | Code width |
|---|---|---|
| Flyer or brochure in the hand | 20–30 cm | 2–3 cm |
| A3 or A2 poster on a wall | 1–2 m | 10–20 cm |
| Standing banner at an entrance | 2–3 m | 20–30 cm |
| Banner above a shop or stall | 4–5 m | 40–50 cm |
| Billboard or across the street | 10 m and more | 1 m and more |
Flyer in hand
30 cm
3 cm
Poster on a wall
1.5 m
15 cm
Standing banner
3 m
30 cm
Banner above the shop
5 m
50 cm
Code width ≈ scanning distance ÷ 10
Why a short link behind the code helps
A QR code holds the link as a pattern of squares. A long link with tracking tags needs more, smaller squares, and small squares are hard to read from far away. A short link keeps the pattern simple.
A QR code made in iBuat.Link always holds a short address, however long your real destination is. You can also change the destination later without reprinting, which matters for a banner that hangs for months. More on that in dynamic vs static QR codes.
Placement and print
- Eye level. Around 1 to 1.5 metres from the ground for posters and standing banners. Not at the bottom edge, where people block it.
- Dark on light. A black or dark code on a white or very light background. Avoid gradients, photos behind the code and light-on-dark versions.
- A white margin all round. Keep text and graphics a clear space away from the code.
- Flat and lit. Avoid folds, seams and shiny laminate that reflects light. At night, make sure the code is lit.
- Tell people what they get. “Scan for the opening promo” works better than a code on its own.
Test before you print the whole run
- 1
Print one at real size
Even a cheap test print on paper, taped to the wall, tells you more than the screen.
- 2
Scan from the real distance
Stand where customers will stand and try it with two or three phones, including an older one.
- 3
Check what opens
Make sure it opens the right page and that the page loads quickly on mobile data.
- 4
Then print the whole run
After printing, count the scans in the QR code’s analytics and compare banners in different places.
Frequently asked questions
Is bigger always better?+
Up to a point. Beyond the size the distance needs, a larger code doesn’t scan better; use the space for a clear call to action instead.
Can I put my logo in the middle?+
Yes, on every iBuat.Link plan, Free included. A logo covers part of the pattern, so make the code a little bigger and test it carefully.
Which file should I give the printer?+
SVG for banners, posters and anything large. PNG works for small prints such as flyers.
Can I change where the banner’s QR code goes after printing?+
Yes, with a QR code made in iBuat.Link. Change the destination in the dashboard and the printed code follows.
Make a QR code that works from across the room
Short address, SVG download, a destination you can change after printing, and a count of every scan.